Trane 5WCC4060A1000 5-Ton Heat Pump Package System — $13945.85 Installed
The Trane 5WCC4060A1000 is a single-stage packaged heat pump rated at 13.6 SEER2,7.0 HSPF2, and 11.0 EER2, certified at 57,000 BTU of cooling capacity (AHRI #216574930), using R-454B refrigerant and Standard Single-Phase (208/230V) power. Sapper HVAC installs this system in Phoenix, AZ at$13945.85 installed, including equipment, fabrication and materials, and crane service.
- Heat Pump
- 5WCC4060A1000
- Trane 5WCC4 · Single-Stage Heat Pump · 5-Ton
Installed selling price
$13945.85
Included in price: equipment + fabrication and materials ($750) + crane service ($600). Sales tax not included on estimate — added on invoice after acceptance.
Price disclaimer: Subject to change based on electrical distance, duct connections, curb adapter requirements, rooftop access, or site-specific conditions. Final price confirmed at on-site estimate.
- Stages
- Single-Stage
- Cooling Capacity (AHRI)
- 57,000 BTU
- SEER2
- 13.6
- EER2
- 11.0
Full Specifications
- Model Number
- 5WCC4060A1000
- Series
- 5WCC4
- System Type
- Single-Stage Packaged Heat Pump
- Stages
- Single-Stage
- Voltage
- Standard Single-Phase (208/230V)
- Cooling Capacity (AHRI)
- 57,000 BTU
- SEER2
- 13.6
- EER2
- 11.0
- HSPF2
- 7.0
- Heat Kit
- BAYHTRG120A
- AHRI Reference Number
- 216574930
- Refrigerant
- R-454B
Warranty
Base: 5-year compressor, coils, and parts. Registered: up to 10-year compressor, coils, and parts. Subject to Trane's written terms, registration, eligibility, and exclusions.
Sapper HVAC provides a 2-year labor warranty on all installations. Complete warranty details at Trane.com.
Manufacturer Reference
About This System
The Trane 5WCC4060A1000 is a 5-ton, single-stage packaged heat pump from the 5WCC4 lineup, providing both heating and cooling electrically with no gas line required. At 57,000 BTU of AHRI-rated cooling capacity it's the largest cabinet in the single-phase 5WCC4 family, sized for a larger Phoenix rooftop on a typical single-family home in the 2,600–3,200 sq ft range — the high end of what most Phoenix Metro rooftops are built to carry, common on larger two-story builds in Chandler, Gilbert, and Queen Creek where a 4-ton would run nonstop on a 112° afternoon and still struggle to hold setpoint. The single-stage compressor runs at full capacity whenever the thermostat calls for cooling and shuts off when the setpoint is reached — the simple, proven, budget-friendly configuration that has served Arizona rooftops for decades.
The 5WCC4 series is Trane's single-stage packaged heat pump lineup, and the 5WCC4060A1000 is the 5-ton size. At 13.6 SEER2 and 7.0 HSPF2 it meets the current federal packaged heat pump baseline, and the R-454B refrigerant keeps the install compliant with current EPA and DOE requirements. We reach for it on rooftop replacements where the existing curb, duct connections, and electrical are in good shape and the homeowner wants a reliable, no-frills cooling and heating solution at the lowest installed price. The BAYHTRG120A heat kit provides electric auxiliary heat for the occasional cold Phoenix night.
Sapper HVAC is veteran-owned and licensed by Arizona (ROC #360142). We confirm the tonnage against a real Manual J load calculation — never a rule-of-thumb guess — verify the electrical, stage the equipment on site, set the crane, and walk you through startup and warranty registration before we leave. You get a fixed installed price up front, done to the Sapper Standard: honest recommendations and precision workmanship.
0% APR for 12 months on approved credit
Other 5WCC4 Options
Frequently Asked Questions
How much does the Trane 5WCC4060A1000 cost installed in Phoenix?
The Trane 5WCC4060A1000 is installed by Sapper HVAC at $13945.85, including the packaged unit, fabrication and materials, and crane service. Sales tax added on invoice. Final price confirmed at on-site estimate.
What is the SEER2 rating of the Trane 5WCC4060A1000?
The Trane 5WCC4060A1000 is rated 13.6 SEER2 and 7.0 HSPF2, AHRI certified #216574930.
Does the Trane 5WCC4060A1000 require a gas line?
No. The 5WCC4060A1000 is a heat pump that provides both heating and cooling electrically. No gas line is required.
What is the warranty on the Trane 5WCC4060A1000?
Base: 5-year compressor, coils, and parts. Registered: up to 10-year compressor, coils, and parts. Subject to Trane's written terms, registration, eligibility, and exclusions.
Ready to Install the Trane 5WCC4060A1000?
Sapper HVAC confirms rooftop access, duct connections, and electrical — then provides a final installed price before work begins.
Veteran-owned · AZ ROC #360142
Repair, Replacement or New Installation?
Need a repair? Sapper HVAC services systems installed by any contractor with a $149 service call. Planning a replacement or new installation? Estimates are free.