Design preview · forms don’t send

Trane 5WCC4048A3000 4-Ton Heat Pump Package System — $12074.13 Installed

The Trane 5WCC4048A3000 is a single-stage packaged heat pump rated at 13.4 SEER2,6.7 HSPF2, and 11.0 EER2, certified at 46,000 BTU of cooling capacity (AHRI #216955810), using R-454B refrigerant and Three-Phase (240V) power. Sapper HVAC installs this system in Phoenix, AZ at$12074.13 installed, including equipment, fabrication and materials, and crane service.

  • Heat Pump
  • 5WCC4048A3000
  • Trane 5WCC4-3 · Single-Stage Heat Pump · 4-Ton

Installed selling price

$12074.13

Included in price: equipment + fabrication and materials ($750) + crane service ($600). Sales tax not included on estimate — added on invoice after acceptance.

Price disclaimer: Subject to change based on electrical distance, duct connections, curb adapter requirements, rooftop access, or site-specific conditions. Final price confirmed at on-site estimate.

Stages
Single-Stage
Cooling Capacity (AHRI)
46,000 BTU
SEER2
13.4
EER2
11.0

Full Specifications

Model Number
5WCC4048A3000
Series
5WCC4-3
System Type
Single-Stage Packaged Heat Pump — Three-Phase
Stages
Single-Stage
Voltage
Three-Phase (240V)
Cooling Capacity (AHRI)
46,000 BTU
SEER2
13.4
EER2
11.0
HSPF2
6.7
Heat Kit
—
AHRI Reference Number
216955810
Refrigerant
R-454B

Warranty

Base: 5-year compressor, coils, and parts. Registered: up to 10-year compressor, coils, and parts. Subject to Trane's written terms, registration, eligibility, and exclusions.

Sapper HVAC provides a 2-year labor warranty on all installations. Complete warranty details at Trane.com.

About This System

The Trane 5WCC4048A3000 is a 4-ton, single-stage packaged heat pump from the three-phase 5WCC4-3 lineup, providing both heating and cooling electrically with no gas line required. At 46,000 BTU of AHRI-rated cooling capacity it's sized for a larger Phoenix rooftop on a typical single-family home in the 2,100–2,600 sq ft range — the second-most-common cabinet size across the Phoenix Metro where two-story builds and open floor plans push the load past what a 3.5-ton can hold on a 110° afternoon. The three-phase (240V) power requirement means this unit is intended for properties already wired for three-phase service — typically larger homes, multi-unit buildings, and light commercial rooftops. The single-stage compressor runs at full capacity whenever the thermostat calls for cooling and shuts off when the setpoint is reached — the simple, proven, budget-friendly configuration that has served Arizona rooftops for decades.

The 5WCC4-3 series is Trane's three-phase, single-stage packaged heat pump lineup, and the 5WCC4048A3000 is the 4-ton size. At 13.4 SEER2 and 6.7 HSPF2 it meets the current federal packaged heat pump baseline, and the R-454B refrigerant keeps the install compliant with current EPA and DOE requirements. We reach for it on three-phase rooftop replacements where the existing curb, duct connections, and electrical are in good shape and the building owner wants a reliable, no-frills cooling and heating solution at the lowest installed price.

Sapper HVAC is veteran-owned and licensed by Arizona (ROC #360142). We confirm the tonnage against a real Manual J load calculation — never a rule-of-thumb guess — verify the three-phase electrical, stage the equipment on site, set the crane, and walk you through startup and warranty registration before we leave. You get a fixed installed price up front, done to the Sapper Standard: honest recommendations and precision workmanship.

0% APR for 12 months on approved credit

Other 5WCC4-3 Options

Frequently Asked Questions

How much does the Trane 5WCC4048A3000 cost installed in Phoenix?

The Trane 5WCC4048A3000 is installed by Sapper HVAC at $12074.13, including the packaged unit, fabrication and materials, and crane service. Sales tax added on invoice. Final price confirmed at on-site estimate.

What is the SEER2 rating of the Trane 5WCC4048A3000?

The Trane 5WCC4048A3000 is rated 13.4 SEER2 and 6.7 HSPF2, AHRI certified #216955810.

Does the Trane 5WCC4048A3000 require a gas line?

No. The 5WCC4048A3000 is a heat pump that provides both heating and cooling electrically. No gas line is required.

What is the warranty on the Trane 5WCC4048A3000?

Base: 5-year compressor, coils, and parts. Registered: up to 10-year compressor, coils, and parts. Subject to Trane's written terms, registration, eligibility, and exclusions.

Ready to Install the Trane 5WCC4048A3000?

Sapper HVAC confirms rooftop access, duct connections, and electrical — then provides a final installed price before work begins.

Veteran-owned · AZ ROC #360142

Repair, Replacement or New Installation?

Need a repair? Sapper HVAC services systems installed by any contractor with a $149 service call. Planning a replacement or new installation? Estimates are free.

Book a Comfort Specialist Tap to Call