Design preview · forms don’t send

Trane 5YCZ5060A1115 5-Ton Gas/Electric Package System — $15414.75 Installed

The Trane 5YCZ5060A1115 is a two-stage gas/electric packaged system rated at 15.2 SEER2 and 11.5 EER2, certified at 60,000 BTU of cooling capacity (AHRI #216574906), using R-454B refrigerant and Standard Single-Phase power. Sapper HVAC installs this system in Phoenix, AZ at$15414.75 installed, including equipment, fabrication and materials, and crane service.

  • Gas/Electric
  • 5YCZ5060A1115
  • Trane 5YCZ5 · Two-Stage Gas/Electric · 5-Ton

Installed selling price

$15414.75

Included in price: equipment + fabrication and materials ($750) + crane service ($600). Sales tax not included on estimate — added on invoice after acceptance.

Price disclaimer: Subject to change based on electrical distance, duct connections, curb adapter requirements, rooftop access, or site-specific conditions. Final price confirmed at on-site estimate.

Stages
Two-Stage
Cooling Capacity (AHRI)
60,000 BTU
SEER2
15.2
EER2
11.5

Full Specifications

Model Number
5YCZ5060A1115
Series
5YCZ5
System Type
Two-Stage Gas/Electric Package
Stages
Two-Stage
Voltage
Standard Single-Phase
Cooling Capacity (AHRI)
60,000 BTU
SEER2
15.2
EER2
11.5
AHRI Reference Number
216574906
Refrigerant
R-454B

Warranty

Base: 5-year compressor, coils, parts; 20-year heat exchanger. Registered: up to 12-year compressor, 10-year coils and parts, 20-year heat exchanger. Subject to Trane's written terms, registration, eligibility, and exclusions.

Sapper HVAC provides a 2-year labor warranty on all installations. Complete warranty details at Trane.com.

About This System

The Trane 5YCZ5060A1115 is a 5-ton, two-stage gas/electric packaged unit that houses a natural gas furnace and electric air conditioner in one rooftop cabinet. At 60,000 BTU it's the largest residential unit in the 5YCZ5 line, sized for a larger Phoenix single-story home in the 2,500–3,200 sq ft range, or a two-story layout where a single rooftop zone needs full capacity to hold the upstairs comfortable through the peak afternoon heat. The two-stage compressor runs at low capacity most of the time, holding a steadier temperature and pulling more moisture out of the air during monsoon season than a single-stage unit cycling full-on and full-off.

We reach for the 5-ton when the home's Manual J load calculation calls for that full capacity — never as a guess. The -1115 cabinet has a footprint that can drop onto an older Trane or American Standard curb without a curb adapter in some cases, avoiding the cost of a fabrication kit. At 15.2 SEER2 it clears the packaged gas/electric baseline, and the R-454B refrigerant keeps the install compliant with current EPA and DOE requirements.

Sapper HVAC is veteran-owned and licensed by Arizona (ROC #360142). We confirm the tonnage against a real Manual J load calculation, stage the equipment on site, set the crane, and walk you through startup and warranty registration before we leave. You get a fixed installed price up front, done to the Sapper Standard: honest recommendations and precision workmanship.

Frequently Asked Questions

How much does the Trane 5YCZ5060A1115 cost installed in Phoenix?

The Trane 5YCZ5060A1115 is installed by Sapper HVAC at $15414.75, including the packaged unit, fabrication and materials, and crane service. Sales tax added on invoice. Final price confirmed at on-site estimate.

What is the SEER2 rating of the Trane 5YCZ5060A1115?

The Trane 5YCZ5060A1115 is rated 15.2 SEER2 and 11.5 EER2, AHRI certified #216574906.

Does the Trane 5YCZ5060A1115 require a gas line?

Yes. This system uses a natural gas furnace for heating. A gas line must be present at the installation site. If no gas line is available, Sapper HVAC installs Trane packaged heat pump systems.

What is the warranty on the Trane 5YCZ5060A1115?

Base: 5-year compressor, coils, parts; 20-year heat exchanger. Registered: up to 12-year compressor, 10-year coils and parts, 20-year heat exchanger. Subject to Trane's written terms, registration, eligibility, and exclusions.

Ready to Install the Trane 5YCZ5060A1115?

Sapper HVAC confirms rooftop access, duct connections, and electrical — then provides a final installed price before work begins.

Veteran-owned · AZ ROC #360142

Repair, Replacement or New Installation?

Need a repair? Sapper HVAC services systems installed by any contractor with a $149 service call. Planning a replacement or new installation? Estimates are free.

Book a Comfort Specialist Tap to Call