Trane 5YCC4060A1090 5-Ton (1090) Gas/Electric Package System — $14193.88 Installed
The Trane 5YCC4060A1090 is a single-stage gas/electric packaged system rated at 13.4 SEER2 and 11.0 EER2, certified at 58,000 BTU of cooling capacity (AHRI #216574894), using R-454B refrigerant and Standard Single-Phase power. Sapper HVAC installs this system in Phoenix, AZ at$14193.88 installed, including equipment, fabrication and materials, and crane service.
- Gas/Electric
- 5YCC4060A1090
- Trane 5YCC4 · Single-Stage Gas/Electric · 5-Ton (1090)
Installed selling price
$14193.88
Included in price: equipment + fabrication and materials ($750) + crane service ($600). Sales tax not included on estimate — added on invoice after acceptance.
Price disclaimer: Subject to change based on electrical distance, duct connections, curb adapter requirements, rooftop access, or site-specific conditions. Final price confirmed at on-site estimate.
- Stages
- Single-Stage
- Cooling Capacity (AHRI)
- 58,000 BTU
- SEER2
- 13.4
- EER2
- 11.0
Full Specifications
- Model Number
- 5YCC4060A1090
- Series
- 5YCC4
- System Type
- Single-Stage Gas/Electric Package
- Stages
- Single-Stage
- Voltage
- Standard Single-Phase
- Cooling Capacity (AHRI)
- 58,000 BTU
- SEER2
- 13.4
- EER2
- 11.0
- AHRI Reference Number
- 216574894
- Refrigerant
- R-454B
Warranty
Base: 5-year compressor, coils, parts; 20-year heat exchanger. Registered: up to 10-year compressor, coils, and parts; 20-year heat exchanger. Subject to Trane's written terms, registration, eligibility, and exclusions.
Sapper HVAC provides a 2-year labor warranty on all installations. Complete warranty details at Trane.com.
Manufacturer Reference
About This System
The Trane 5YCC4060A1090 is a 5-ton, single-stage gas/electric packaged unit combining a natural gas furnace and electric air conditioner in one rooftop cabinet. At 58,000 BTU of AHRI-rated cooling capacity it's sized for larger Phoenix homes — typically 2,400–3,200 sq ft single-story or two-story builds — and is the largest tonnage in the 5YCC4 single-phase gas/electric series. The single-stage compressor runs at full capacity when it kicks on and cycles off when the setpoint is met — straightforward, reliable operation at a value price point in the Trane gas/electric packaged lineup.
The -1090 variant is the higher-amp 5-ton single-phase cabinet in the 5YCC4 series, typically specified when the existing disconnect or rooftop electrical already accommodates the higher amp draw, or when a slight upgrade in blower capacity is desired for the same tonnage. The 5YCC4 series is Trane's baseline single-stage gas/electric package, built for standard single-phase residential service. We reach for it on straightforward rooftop replacements where the existing curb, duct connections, and single-phase electrical are all in good shape and the goal is a dependable, code-compliant system at the best value — no premium for two-stage comfort or higher SEER2 that this tonnage may not benefit from as much. At 13.4 SEER2 it clears the federal packaged gas/electric baseline, and the R-454B refrigerant keeps the install compliant with current EPA and DOE requirements.
Sapper HVAC is veteran-owned and licensed by Arizona (ROC #360142). We confirm the tonnage against a real Manual J load calculation — never a rule-of-thumb guess — verify the single-phase electrical and gas line, stage the equipment on site, set the crane, and walk you through startup and warranty registration before we leave. You get a fixed installed price up front, done to the Sapper Standard: honest recommendations and precision workmanship.
Frequently Asked Questions
How much does the Trane 5YCC4060A1090 cost installed in Phoenix?
The Trane 5YCC4060A1090 is installed by Sapper HVAC at $14193.88, including the packaged unit, fabrication and materials, and crane service. Sales tax added on invoice. Final price confirmed at on-site estimate.
What is the SEER2 rating of the Trane 5YCC4060A1090?
The Trane 5YCC4060A1090 is rated 13.4 SEER2 and 11.0 EER2, AHRI certified #216574894.
Does the Trane 5YCC4060A1090 require a gas line?
Yes. This system uses a natural gas furnace for heating. A gas line must be present at the installation site. If no gas line is available, Sapper HVAC installs Trane packaged heat pump systems.
What is the warranty on the Trane 5YCC4060A1090?
Base: 5-year compressor, coils, parts; 20-year heat exchanger. Registered: up to 10-year compressor, coils, and parts; 20-year heat exchanger. Subject to Trane's written terms, registration, eligibility, and exclusions.
Ready to Install the Trane 5YCC4060A1090?
Sapper HVAC confirms rooftop access, duct connections, and electrical — then provides a final installed price before work begins.
Veteran-owned · AZ ROC #360142
Repair, Replacement or New Installation?
Need a repair? Sapper HVAC services systems installed by any contractor with a $149 service call. Planning a replacement or new installation? Estimates are free.