Design preview · forms don’t send

Trane 5YCC4048A4090 4-Ton (4090) Gas/Electric Package System — $13870.17 Installed

The Trane 5YCC4048A4090 is a single-stage gas/electric packaged system rated at 13.4 SEER2 and 11.0 EER2, certified at 47,500 BTU of cooling capacity (AHRI #216953843), using R-454B refrigerant and 460V Three-Phase power. Sapper HVAC installs this system in Phoenix, AZ at$13870.17 installed, including equipment, fabrication and materials, and crane service.

  • Gas/Electric
  • 5YCC4048A4090
  • Trane 5YCC4-4 · Single-Stage Gas/Electric · 4-Ton (4090)

Installed selling price

$13870.17

Included in price: equipment + fabrication and materials ($750) + crane service ($600). Sales tax not included on estimate — added on invoice after acceptance.

Price disclaimer: Subject to change based on electrical distance, duct connections, curb adapter requirements, rooftop access, or site-specific conditions. Final price confirmed at on-site estimate.

Stages
Single-Stage
Cooling Capacity (AHRI)
47,500 BTU
SEER2
13.4
EER2
11.0

Full Specifications

Model Number
5YCC4048A4090
Series
5YCC4-4
System Type
Single-Stage Gas/Electric Package — 460V Three-Phase
Stages
Single-Stage
Voltage
460V Three-Phase
Cooling Capacity (AHRI)
47,500 BTU
SEER2
13.4
EER2
11.0
AHRI Reference Number
216953843
Refrigerant
R-454B

Warranty

Base: 5-year compressor, coils, parts; 20-year heat exchanger. Registered: up to 10-year compressor, coils, and parts; 20-year heat exchanger. Subject to Trane's written terms, registration, eligibility, and exclusions.

Sapper HVAC provides a 2-year labor warranty on all installations. Complete warranty details at Trane.com.

About This System

The Trane 5YCC4048A4090 is a 4-ton, single-stage gas/electric packaged unit combining a natural gas furnace and electric air conditioner in one rooftop cabinet. At 47,500 BTU of AHRI-rated cooling capacity it's sized for a larger Phoenix single-story home in the 2,000–2,400 sq ft range — common on Gilbert, Mesa, and Queen Creek builds with open floor plans and vaulted ceilings that push the load up a ton above a 3.5. The single-stage compressor runs at full capacity when it kicks on and cycles off when the setpoint is met — straightforward, reliable operation at a value price point in the Trane gas/electric packaged lineup.

The -4090 variant is the higher-amp 460V three-phase cabinet in the 5YCC4-4 series, specified for commercial light-commercial applications or larger homes with three-phase service already present. Three-phase power distributes the electrical load across three conductors, reducing amp draw per leg and allowing smaller conductors for the same tonnage — an advantage on properties where the existing disconnect or service panel is already three-phase and a slight upgrade in blower capacity is desired. The 5YCC4-4 series is Trane's baseline single-stage gas/electric package for three-phase service, built for standard rooftop replacements where the curb, duct connections, and electrical are all in good shape and the goal is a dependable, code-compliant system at the best value. At 13.4 SEER2 it clears the federal packaged gas/electric baseline, and the R-454B refrigerant keeps the install compliant with current EPA and DOE requirements.

Sapper HVAC is veteran-owned and licensed by Arizona (ROC #360142). We confirm the tonnage against a real Manual J load calculation — never a rule-of-thumb guess — verify the three-phase electrical and gas line, stage the equipment on site, set the crane, and walk you through startup and warranty registration before we leave. You get a fixed installed price up front, done to the Sapper Standard: honest recommendations and precision workmanship.

Frequently Asked Questions

How much does the Trane 5YCC4048A4090 cost installed in Phoenix?

The Trane 5YCC4048A4090 is installed by Sapper HVAC at $13870.17, including the packaged unit, fabrication and materials, and crane service. Sales tax added on invoice. Final price confirmed at on-site estimate.

What is the SEER2 rating of the Trane 5YCC4048A4090?

The Trane 5YCC4048A4090 is rated 13.4 SEER2 and 11.0 EER2, AHRI certified #216953843.

Does the Trane 5YCC4048A4090 require a gas line?

Yes. This system uses a natural gas furnace for heating. A gas line must be present at the installation site. If no gas line is available, Sapper HVAC installs Trane packaged heat pump systems.

What is the warranty on the Trane 5YCC4048A4090?

Base: 5-year compressor, coils, parts; 20-year heat exchanger. Registered: up to 10-year compressor, coils, and parts; 20-year heat exchanger. Subject to Trane's written terms, registration, eligibility, and exclusions.

Ready to Install the Trane 5YCC4048A4090?

Sapper HVAC confirms rooftop access, duct connections, and electrical — then provides a final installed price before work begins.

Veteran-owned · AZ ROC #360142

Repair, Replacement or New Installation?

Need a repair? Sapper HVAC services systems installed by any contractor with a $149 service call. Planning a replacement or new installation? Estimates are free.

Book a Comfort Specialist Tap to Call