Gilbert, Arizona · Sapper HVAC
Daikin 18,000 BTU Mini Split Installed in Gilbert, AZ Garage
A Gilbert homeowner's two-car garage was hitting 130°F in July. We installed a high-efficiency Daikin ductless system — same day, no ductwork required.
- Completed Project · Gilbert , AZ · ROC#360142
- LOCATION
- Power Ranch, Gilbert
- SERVICE
- Ductless Mini Split Installation
EQUIPMENT
Daikin
COMPLETED
Summer 2024
HOME SIZE
680 sq ft garage
EFFICIENCY
19 SEER2

Veteran-Owned
Licensed · Bonded · Insured
The Problem
A Two-Car Garage That Was Unusable All Summer
The Gilbert homeowner used their attached two-car garage as a home gym and workshop. Every summer, the space became completely unusable — ambient temps regularly exceeded 130°F by early afternoon. The garage shared a wall with the home's living room, meaning the heat bled in and raised the whole-home cooling load. A portable AC unit they'd tried in the past couldn't keep up and kept tripping off on high-temperature lockout.
The Solution
Properly Sized Daikin Mini Split — Installed in One Day
After a site evaluation, Sapper HVAC sized the system at 18,000 BTU — accounting for the garage's poor insulation, metal roll-up door, west-facing wall, and heavy-use heat generation from workout equipment. We ran a dedicated 240V circuit from the main panel, mounted the indoor air handler high on the north wall for optimal airflow, routed the line set through the exterior wall, and completed the full installation in a single day. The system is Daikin's AURORA series, rated for operation down to -13°F and up to 115°F ambient — handling Phoenix summers without performance degradation.
Before & After
The Transformation

Before: 130°F Garage, No Cooling

After: Daikin Mini Split — Comfortable Year-Round
What Was Done
Installation Details
Manual J load calculation for the 680 sq ft space
Daikin 18,000 BTU single-zone indoor air handler installed on north wall
Outdoor condenser unit mounted on concrete pad, east side of home
25 ft line set routed through block wall with weatherproof cover
Dedicated 240V / 20A circuit pulled from main panel
Electrical permit and mechanical permit obtained from City of Gilbert
System charged, commissioned, and tested at full load
Homeowner walkthrough — remote pairing, filter maintenance, seasonal tips
Final inspection coordination included
Equipment Installed
Daikin 18,000 BTU Single-Zone Mini Split (FTXS18LVJU / RXS18LVJU)
Capacity: 18,000 BTU (1.5-ton)
Efficiency: 19 SEER2
Common Questions
FAQs About This Project
How much does a Daikin mini split installation cost in Gilbert, AZ?
This Gilbert garage project — including the Daikin 18,000 BTU system, all labor, the dedicated 240V circuit, line set, and permits — came in between $3,200 and $3,800. Prices vary based on BTU size, line set length, electrical panel distance, and permit fees. Sapper HVAC provides free, itemized written estimates.
What size mini split do I need for a two-car garage in Gilbert?
Most standard two-car garages in Gilbert (400–700 sq ft) need 12,000–18,000 BTU. This garage needed 18,000 BTU due to poor insulation, a west-facing metal roll-up door, and high ambient use. Garages used as gyms or workshops generate additional heat that needs to be accounted for in the sizing calculation.
Is a Daikin mini split worth it for a Phoenix area garage?
Yes — in the Phoenix Metro, a properly sized mini split is the most reliable cooling solution for garages. Portable units and window ACs consistently fail under extreme heat load and hit thermal lockout. A Daikin AURORA mini split is rated for up to 115°F ambient operation and runs efficiently all summer without performance drop.
Does Sapper HVAC pull permits for garage mini split installations in Gilbert?
Yes. All Sapper HVAC installations include permit acquisition. The City of Gilbert requires both a mechanical permit and an electrical permit for new mini split installations. We obtain both, schedule the inspection, and coordinate the final sign-off — the homeowner doesn't need to manage any of that.
Can I get rebates or tax credits on a Daikin mini split in Gilbert?
Qualifying Daikin systems are not eligible for the federal 25C credit on 2026 installations. APS customers in Gilbert may also qualify for utility rebates. Sapper HVAC checks eligibility for both programs before every installation.
Serving Gilbert, AZ & All Phoenix Metro
Want a Mini Split in Your Gilbert Garage?
Free on-site evaluation, itemized quote, same-day installation on most jobs. Permits handled. Veteran-owned. Licensed ROC#360142.
Related Resources
More From Sapper HVAC
Mini Split Installation in Gilbert
Full-service ductless mini split installation across Gilbert and Queen Creek.
Learn More →
HVAC Services in Gilbert, AZ
Complete HVAC installation and repair services for Gilbert homeowners.
Learn More →
Daikin Mini Split Installer Phoenix
Sapper HVAC is a Daikin installer in the Phoenix Metro.
Learn More →
Mini Split Installation Phoenix Metro
Ductless mini split installation for garages, additions, and whole-home zoning.
Learn More →
HVAC Financing Options
Spread the cost of your mini split installation over time — 0% options available.
Learn More →
Arizona HVAC Rebates
APS, SRP, and federal rebate programs for qualifying efficient systems.
Learn More →
Phoenix Metro coverage
More Sapper HVAC service areas
Veteran-owned · AZ ROC #360142
Repair, Replacement or New Installation?
Need a repair? Sapper HVAC services systems installed by any contractor with a $149 service call. Planning a replacement or new installation? Estimates are free.