Design preview · forms don’t send

$1.25/sq ft R-30 Attic Insulation with Any AC Install

Blown-in fiberglass attic insulation installed at the same time as your new AC. One crew. One visit. One lower combined price.

R-30 blown-in fiberglass attic insulation installed by Sapper HVAC in a Phoenix area home

Insulation + AC Install Deal

R-30 Blown-In Fiberglass Attic Insulation for $1.25/sq ft

Add R-30 blown-in fiberglass attic insulation to any qualifying new AC installation and lock in a lower combined price. Your new AC works against a cooler attic. You pay less per square foot than a standalone insulation project.

Open attic floor areas

Same visit as your AC install

Even R-30 rated coverage

Phoenix Metro service area

Sapper Standard

Veteran-owned. Licensed. Bonded. Insured.

Arizona ROC #360142. Free in-home estimate. Serving the Phoenix Metro and surrounding Arizona communities. Business hours 6 AM to 6 PM, Monday through Saturday.

Why Insulate With Your AC

Pair Your New AC with R-30 Attic Insulation

Lower cooling loads

R-30 attic insulation slows heat from entering your living space. Your new AC runs less to hold your set temperature.

Lower energy bills

Less heat gain means your new system uses less energy. Insulation pays back over time through lower monthly bills.

More even comfort

Insulation helps rooms stay closer to the same temperature. You notice fewer hot spots across your home.

Longer equipment life

A well-insulated attic lets your new AC run shorter cycles. Shorter cycles reduce wear on your new equipment.

Better value in one visit

Adding insulation during your AC install saves a second trip. One crew, one visit, one lower combined price.

Arizona heat ready

R-30 is the rated value Sapper HVAC recommends for Phoenix Metro attics. It fits how Arizona homes gain heat through the roof.

Standard Installation

What the $1.25/sq ft Rate Includes

R-30 blown-in fiberglass insulation material

Professional installation at the same time as your AC install

Even coverage across open attic floor areas

Proper depth to reach R-30 rated value

Careful protection of attic vents and access

Cleanup of work area

Installation by Sapper HVAC technicians

Serving the Phoenix Metro area

Service Area

Where Sapper HVAC Installs R-30 Attic Insulation

Phoenix

Chandler

Gilbert

Mesa

Tempe

Scottsdale

Glendale

Peoria

Surprise

Queen Creek

San Tan Valley

Florence

Maricopa

Casa Grande

Avondale

Goodyear

Buckeye

Fountain Hills

Paradise Valley

Apache Junction

Offer Terms

$1.25 per square foot promotional rate applies to R-30 blown-in fiberglass attic insulation installed by Sapper HVAC at the same time as any qualifying new AC installation. Rate covers material and standard installation labor for attic floor areas that are open and accessible. Minimum attic area and offer eligibility apply. Vapor barriers, baffles, attic access covers, removal of existing insulation, knob-and-tube wiring remediation, restricted-access areas, cathedral ceilings, garage ceilings, and other non-standard conditions are additional. Applicable sales tax is not included. Cannot be combined with other promotions unless specifically approved by Sapper HVAC.

Insulation Offer FAQ

Common Questions

What is the $1.25 per square foot insulation offer?

Sapper HVAC installs R-30 blown-in fiberglass attic insulation for $1.25 per square foot when you add it to any qualifying new AC installation. The rate covers the insulation material and standard installation labor for open, accessible attic floor areas.

Why add insulation with my AC installation?

Adding insulation at the same time as your new AC lowers the cooling load on the new system. Your AC runs less, uses less energy, and holds your set temperature more evenly. You also save by completing both projects in one visit.

What does R-30 mean?

R-30 is a thermal resistance rating. Higher R-value means more resistance to heat flow. Sapper HVAC recommends R-30 for Phoenix Metro attics because it matches how Arizona homes gain heat through the roof.

Is blown-in fiberglass safe for my attic?

Blown-in fiberglass is a common attic insulation material. Sapper HVAC installs it to an even depth across open attic floor areas and protects vents and access points during installation.

What attic areas are covered at $1.25 per square foot?

The promotional rate covers open and accessible attic floor areas. Restricted-access areas, cathedral ceilings, garage ceilings, vapor barriers, baffles, attic access covers, removal of old insulation, and knob-and-tube wiring remediation are additional.

How do I get this offer?

Call Sapper HVAC at (602) 206-7359 or request a free estimate online. Sapper HVAC confirms your attic area, access conditions, AC install eligibility, and offer details before any work is approved.

Does the $1.25 rate include sales tax?

No. Applicable Arizona sales tax is not included in the $1.25 per square foot rate.

Can I use this offer without an AC installation?

No. The $1.25 per square foot rate applies only when insulation is installed at the same time as a qualifying new AC installation from Sapper HVAC.

R-30 Attic Blown-In Fiberglass Insulation

$1.25/sq ft with Any AC Install

Call Sapper HVAC or request your free estimate online. Confirm your attic area and AC install eligibility today.

Veteran-owned · AZ ROC #360142

Repair, Replacement or New Installation?

Need a repair? Sapper HVAC services systems installed by any contractor with a $149 service call. Planning a replacement or new installation? Estimates are free.

Book a Comfort Specialist Tap to Call